Flaggskipserien til både rotel og psb samlet i en kraftpakke !
Det blir ikke bedre enn dette i denne prisklassen !
The Pinnacle of Performance
PSB’s T600 Premium Tower Speakers deliver revelatory listening experiences, with uncanny tonal accuracy, thrilling dynamics, high-impact bass, transparent midrange, pinpoint imaging, and exquisite micro-detail. Featuring an all-new driver platform, new enclosure design, amplitude-perfect Linkwitz-Riley acoustic crossover, and integrated IsoAcoustics isolators, the Synchrony T600 is the most advanced speaker PSB has ever offered.
Frequency response:
28-20,000Hz (±1.5db), 24-23,000Hz (±3db)
3 x 6½" (165mm) woofers and 1 x 5¼" (133mm) midrange driver with woven carbon fibre cones, cast aluminum baskets, mass-loaded rubber surrounds, and advanced motor structures
1 x 1" (25mm) titanium dome tweeter with Ferrofluid damping and neodymium magnet
Low-resonance MDF cabinet with extensive bracing and decoupled aluminum-clad front baffle
Outrigger stabilizers with integrated IsoAcoustics isolators
Advanced Driver Design
The T600’s 6½" (165mm) woofers and 5¼" (133mm) midrange driver feature die-cast aluminum baskets, woven carbon-fibre cones, mass-loaded rubber surrounds, and an advanced motor structure that maintains constant magnetic force in the voice coil gap. The 1" (25mm) titanium dome tweeter features Ferrofluid damping and a neodymium magnet.
These refinements result in wider bandwidth, higher maximum output, higher efficiency, better power handling, and reduced harmonic and intermodulation distortion. Combined with the B600’s amplitude-perfect Linkwitz-Riley 4th-order acoustic crossover, these advanced drivers deliver remarkably flat frequency response, so that every sound you hear is True to Nature.
Quiet Please
The T600’s MDF enclosure has more extensive internal bracing than any speaker PSB has ever built. This minimizes cabinet resonances that can cause uneven response and blur transients. The front baffle is clad in a 5mm-thick solid aluminum plate, which suppresses “baffle talk” that can obscure fine detail. Ten isolation cups decouple the aluminum plate from the enclosure, another measure that helps preserve fine detail.
The enclosure is divided into four chambers: one sealed chamber for the midrange driver and tweeter, and three identically tuned rear-ported chambers, one for each woofer. This breaks up standing waves inside the enclosure that could otherwise cause uneven response and distortion.
At the base of each T600 Tower are four outrigger stabilizers with custom isolators based on IsoAcoustics’ award-winning Gaia II isolators. These prevent mechanical energy produced by the drivers and cabinet from being reflected back into the enclosure. The result is improved micro-detail, clearer transients, a wider soundstage, and more precise imaging.
Smooth, Powerful Bass
The T600’s transitional-array design, with three woofers that cover progressively narrower frequency bands, produces smoother bass response, because it randomizes the floor bounce, wherein reflections of low-frequency waves from the floor interfere with direct radiation of the woofers.
Each T600 tower comes with two port plugs that can be inserted into the bass-reflex ports at the back. This lets listeners tailor bass output to suit their listening environment. The result is bass that is deep and visceral, yet taut and tuneful, and does not overload the room.
A Feast for the Eyes
The Synchrony T600 is available in two gorgeous furniture-grade finishes: Satin Walnut Veneer and High Gloss Piano Black. Acoustically transparent, magnetically attached grilles enhance the T600’s visual appeal. With design elements such as a tastefully etched Synchrony logo on the top edge of the baffle, PSB’s Synchrony T600 Towers will fit gracefully into any décor.
Frequency response: 28-20,000Hz (±1.5db), 24-23,000Hz (±3db)
3 x 6½" (165mm) woofers and 1 x 5¼" (133mm) midrange driver with woven carbon fibre cones, cast aluminum baskets, mass-loaded rubber surrounds, and advanced motor structures
1 x 1" (25mm) titanium dome tweeter with Ferrofluid damping and neodymium magnet
Amplitude-perfect Linkwitz-Riley 4th-order acoustic crossover
Five-way transitional array design that randomizes the floor bounce
Low-resonance MDF cabinet with extensive bracing and decoupled aluminum-clad front baffle
Individually tuned chambers with rear-firing ports for each woofer
Outrigger stabilizers with integrated IsoAcoustics isolators
Satin Walnut Veneer and High Gloss Piano Black, with acoustically transparent magnetically attached grilles
Frequency Response
On Axis @ 0° ±3dB 24-23,000Hz
On Axis @ 0° ±1 1/2dB 28-20,000Hz
Off Axis @ 30° ±1 1/2dB 30-10,000Hz
LF Cutoff 20Hz
Sensitivity
Anechoic Chamber 89dB
Listening Room 91dB
Impedance
Nominal 4 Ohms
Minimum 4 Ohms
Input Power
Recommended 20 - 300 Watts
Program 300 Watts
Acoustic Design
Tweeter 1” (25mm) Titanium Dome with Ferrofluid
Midrange 5 1/4” (133mm)
Cast Basket
Carbon Fibre Cone
Rubber Surround
Woofer 3 x 6 1/2” (165mm)
Cast Basket
Carbon Fibre Cone
Rubber Surround
Crossover 450Hz B3, 1800Hz LR4
Design Type Transitional 3-way system
Bass Reflex,
Triple Rear facing ports
3 Individual Woofer chambers
Dimensions / Weights / Finish
Size (W x H x D) 9 x 41 1/4 x 13 1/2”
228 x 1048 x 343mm
Weight Net - 77 lbs (34.9 kg)
Finish Satin Walnut
High Gloss Black
Features Triple, 5-way
Gold-plated Binding Posts
Tri-wireable/Tri-ampable,
Magnetic Grille
Outrigger stabilizers with isoAcoustic GAIA II feet
Port Plug (x2)
Subdivided discrete chambers 3 Individual Woofer Chambers Triple Rear Facing Ports
Michi X3 Series 2
Elegant, effektiv og uten kompromisser
De nye Series 2-modellene fra Rotel kommer med til sammen over 320 komponentoppgraderinger. Alle modellene er oppdatert med bruk av 8-kanals ESS SABRE ES9028PRO 32-bit 768kHz digital-til-analog-konvertere.
Michi X3 Series 2 integrert forsterker leverer en enestående lytteopplevelse med over 90 komponentoppgraderinger som gir eksepsjonell nøyaktighet, raffinement og detaljer i et stort lydbilde. Den kombinerer 350 watt klasse AB utgangseffekt og en 8-kanals ESS SABRE Digital til Analog-konverter for å gi raffinert og forbedret ytelse. Analog RCA, XLR, Moving Magnet Phono, aptX™ HD Bluetooth, Coaxial, Optisk og PC-USB med MQA-støtte er alle støttet.
Strømforsyningen og lydkretser er blitt ombygd og forbedret for å gjengi musikk med økt presisjon og detaljer. Optimaliserte signalveier og lavere støynivå-kretser presenterer musikk mot en helt stille bakgrunn med nesten ingen forvrengning.
Michi X3 Series 2 er bygget for både musikkelskere og lydentusiaster, hvor hver eneste detalj i design, ingeniørarbeid og produksjon er nøye tilpasset for å levere enestående ytelse.
Betjening og oppsett av X3 Series 2 er enkelt og gjøres med den medfølgende Michi IR-fjernkontrollen, frontpanelkontrollene og stor grafisk skjerm. Doble Michi-utviklede høyttalerterminaler med platinaplater gir mulighet for både bi-wiring og tradisjonelle høyttalerkoblinger.
Spesifikasjoner:
• ESS SABRE ES9028PRO 8-Channel DAC (32-bit 768kHz) Configured for STEREO
• Coaxial (3), Optical (3) and Analog RCA (3) inputs
• PC-USB with DSD 4X decoding and MQA rendering
• Bluetooth with aptXTM HD and AAC
• Moving Magnet Phono Stage input
• XLR Balanced input
• Custom engineered toroidal transformer
• Dimmable front panel TFT high resolution display
• IP and RS232 2-way communication for control system integration
• Michi remote control