Helt rå stereopakke !
PSB SYNCHRONY T600
The Pinnacle of Performance
PSB’s T600 Premium Tower Speakers deliver revelatory listening experiences, with uncanny tonal accuracy, thrilling dynamics, high-impact bass, transparent midrange, pinpoint imaging, and exquisite micro-detail. Featuring an all-new driver platform, new enclosure design, amplitude-perfect Linkwitz-Riley acoustic crossover, and integrated IsoAcoustics isolators, the Synchrony T600 is the most advanced speaker PSB has ever offered.
Frequency response: 28-20,000Hz (±1.5db), 24-23,000Hz (±3db)
3 x 6½" (165mm) woofers and 1 x 5¼" (133mm) midrange driver with woven carbon fibre cones, cast aluminum baskets, mass-loaded rubber surrounds, and advanced motor structures
1 x 1" (25mm) titanium dome tweeter with Ferrofluid damping and neodymium magnet
Low-resonance MDF cabinet with extensive bracing and decoupled aluminum-clad front baffle
Outrigger stabilizers with integrated IsoAcoustics isolators
Advanced Driver Design
The T600’s 6½" (165mm) woofers and 5¼" (133mm) midrange driver feature die-cast aluminum baskets, woven carbon-fibre cones, mass-loaded rubber surrounds, and an advanced motor structure that maintains constant magnetic force in the voice coil gap. The 1" (25mm) titanium dome tweeter features Ferrofluid damping and a neodymium magnet.
These refinements result in wider bandwidth, higher maximum output, higher efficiency, better power handling, and reduced harmonic and intermodulation distortion. Combined with the B600’s amplitude-perfect Linkwitz-Riley 4th-order acoustic crossover, these advanced drivers deliver remarkably flat frequency response, so that every sound you hear is True to Nature.
Quiet Please
The T600’s MDF enclosure has more extensive internal bracing than any speaker PSB has ever built. This minimizes cabinet resonances that can cause uneven response and blur transients. The front baffle is clad in a 5mm-thick solid aluminum plate, which suppresses “baffle talk” that can obscure fine detail. Ten isolation cups decouple the aluminum plate from the enclosure, another measure that helps preserve fine detail.
The enclosure is divided into four chambers: one sealed chamber for the midrange driver and tweeter, and three identically tuned rear-ported chambers, one for each woofer. This breaks up standing waves inside the enclosure that could otherwise cause uneven response and distortion.
At the base of each T600 Tower are four outrigger stabilizers with custom isolators based on IsoAcoustics’ award-winning Gaia II isolators. These prevent mechanical energy produced by the drivers and cabinet from being reflected back into the enclosure. The result is improved micro-detail, clearer transients, a wider soundstage, and more precise imaging.
Smooth, Powerful Bass
The T600’s transitional-array design, with three woofers that cover progressively narrower frequency bands, produces smoother bass response, because it randomizes the floor bounce, wherein reflections of low-frequency waves from the floor interfere with direct radiation of the woofers.
Each T600 tower comes with two port plugs that can be inserted into the bass-reflex ports at the back. This lets listeners tailor bass output to suit their listening environment. The result is bass that is deep and visceral, yet taut and tuneful, and does not overload the room.
A Feast for the Eyes
The Synchrony T600 is available in two gorgeous furniture-grade finishes: Satin Walnut Veneer and High Gloss Piano Black. Acoustically transparent, magnetically attached grilles enhance the T600’s visual appeal. With design elements such as a tastefully etched Synchrony logo on the top edge of the baffle, PSB’s Synchrony T600 Towers will fit gracefully into any décor.
Frequency response: 28-20,000Hz (±1.5db), 24-23,000Hz (±3db)
3 x 6½" (165mm) woofers and 1 x 5¼" (133mm) midrange driver with woven carbon fibre cones, cast aluminum baskets, mass-loaded rubber surrounds, and advanced motor structures
1 x 1" (25mm) titanium dome tweeter with Ferrofluid damping and neodymium magnet
Amplitude-perfect Linkwitz-Riley 4th-order acoustic crossover
Five-way transitional array design that randomizes the floor bounce
Low-resonance MDF cabinet with extensive bracing and decoupled aluminum-clad front baffle
Individually tuned chambers with rear-firing ports for each woofer
Outrigger stabilizers with integrated IsoAcoustics isolators
Satin Walnut Veneer and High Gloss Piano Black, with acoustically transparent magnetically attached grilles
Frequency Response
On Axis @ 0° ±3dB 24-23,000Hz
On Axis @ 0° ±1 1/2dB 28-20,000Hz
Off Axis @ 30° ±1 1/2dB 30-10,000Hz
LF Cutoff 20Hz
Sensitivity
Anechoic Chamber 89dB
Listening Room 91dB
Impedance
Nominal 4 Ohms
Minimum 4 Ohms
Input Power
Recommended 20 - 300 Watts
Program 300 Watts
Acoustic Design
Tweeter 1” (25mm) Titanium Dome with Ferrofluid
Midrange 5 1/4” (133mm)
Cast Basket
Carbon Fibre Cone
Rubber Surround
Woofer 3 x 6 1/2” (165mm)
Cast Basket
Carbon Fibre Cone
Rubber Surround
Crossover 450Hz B3, 1800Hz LR4
Design Type Transitional 3-way system
Bass Reflex,
Triple Rear facing ports
3 Individual Woofer chambers
Dimensions / Weights / Finish
Size (W x H x D) 9 x 41 1/4 x 13 1/2”
228 x 1048 x 343mm
Weight Net - 77 lbs (34.9 kg)
Finish Satin Walnut
High Gloss Black
Features Triple, 5-way
Gold-plated Binding Posts
Tri-wireable/Tri-ampable,
Magnetic Grille
Outrigger stabilizers with isoAcoustic GAIA II feet
Port Plug (x2)
Subdivided discrete chambers 3 Individual Woofer Chambers Triple Rear Facing Ports
Rotel RA-1592 MKII
RA-1592MKII leverer 200, klasse AB, watt i 8 ohm, og støtter alle dine favoritt inganger både analoge og digitale inganger, aptXTM og AAC Bluetooth, PC-USB med MQA og Moving Magnet Phono-inngangr. Den audiofile 32-bit/384 kHz DAC-en og nøyaktig "tunede" kretser gir et enestående lydbilde med eksakt posisjonering.
Enten du er en erfaren audiofil eller uformell lytter, har tiden aldri vært bedre for å være musikkinteressert. En nesten ubegrenset tilførsel av musikk er tilgjengelig for hånden via streaming, digitale medier, klassisk vinyl og mer. Rotel har designet og produsert lydprodukter av høy kvalitet og høy ytelse i over 60 år, og gjengir lyd med eksepsjonelle detaljer og fantastisk klarhet. RA-1592MKII fortsetter stolt med tradisjonen og arven til dette ikoniske merket.
RA-1592MKII integrertforsterker inkluderer kretsdesigninnovasjoner, optimalisering av lydsignalbaner og oppdateringer til kritiske strømforsyningskomponenter som gir en fantastisk ytelse med dynamisk rytme og timing. RA-1592MKII benytter Rotels beste forforsterker-topologi og prisvinnende effektforsterkerteknologi, og er et kompromissløst, størrelseseffektivt, alt-i-ett-integrert lydprodukt.
RA-1592MKII leverer 200 watt per kanal i 8 ohm drevet av Rotels egenproduserte toroidformede transformator som mater en rekke spaltefoliekondensatorer for rik, dyp, kontrollert bass. RA-1592MKII støtter favorittkildene dine, inkludert RCA, XLR, Digital(opt, coax), aptX ™ og AAC trådløs Bluetooth, PC-USB-støttende MQA og 32-bit/384kHz PCM og Moving Magnet Phono-ingang.
Digital til analog konverteringen skjer i en Texas Instruments premium DAC med presist justerte utgangsfilterkretser som gir enestående akustiske detaljer, bredt lydbilde og presist posisjonering. RA-1592KII er sertifisert Roon Tested som gir den beste opplevelsen ved hjelp av Roon-programvare, slik at du bare kan nyte musikken. Valgbare AB-høyttalerutganger, RS232, Ethernet og 12V utløsere sikrer sømløs integrasjon med kontrollsystemer. Praktisk, ytelse og verdi - RA -1592MKII leverer.